Skate Sizing


Choosing the correct skate size is a very important task and usually even more important than choosing the skates model! All high-quality skates will have a break in period and would adjust over time to the skater’s feet. Some will take longer and some shorter, but while you want to have a comfortable ride you do not want to have the skates too loose… The correct fit will determine much more than just the comfort - it will define how much control, power transfer, and agility you would have while skating, and even would affect the balance.

While various skating styles and skaters themselves have different preferences, below are the general instructions of how to determine the perfect fit for your new skates.
 

WHAT SIZE SHOULD I CHOOSE?

Most of inline and roller skates are manufactured and sold in European sizes (EU), so your US / UK sizing could be a wrong idea to use due to the conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size. In any case, the inline and roller skate size should be either equal to your shoe size or no more than one size up or down from it.
 
Based on our experience, the best way to determine your skate size is to take a look at your current pair of skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers are indicating the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into brand or model specific sizing chart (usually located in the Sizing tab under the skates photos or as one of the product photos). If cannot be located, please send us an inquiry and we gladly will help you out!
 
Important: Many shops are recommending measuring your feet to determine your skate size, but we have found that this leads to too many mistakes and do not recommend that. If after following the instructions above you are finding yourself stuck in between two sizes, you could measure your feet according to the directions below. In this case, your shoe size is still the defining factor, so if the measurement is showing more than one size up or down, something is wrong with the measurement! If your foot is wider than average, please go one size up. Usually, Seba, FR, and Adapt skates fit wider than average, Powerslide and K2 average, Flying Eagle and Rollerblade average to narrow...
 

Still, want to measure your feet? Here is how to do it:

You’ll need paper, pen, a flat wall and, if possible, a buddy to help. It’s best to measure your feet later in the day after you have been on them for a few hours to account for swelling.
Find a hard floor with a flat wall. Tape a piece of paper down so that it touches the wall. Stand on the paper in bare feet, with your heel just touching the wall.
Have your friend take a book and place it so that it just touches the tip of your longest toe. Mark the spot where the book meets your toe. Do this with both feet and use the larger of the two measurements. Measure your foot length in millimeters, if possible. If you measure in inches, be sure to measure in 16ths of an inch.
Choose your size from the manufacturers sizing chart. The “Max Foot Length” is the longest foot measurement that will fit into that size. The US Men’s column lists the sizes found on the box.
 

SIZING FOR CONTROL OVER COMFORT

Our sizing advice is targeted to a freestyle or dance skater who wants a very snug fit in their skate to enjoy maximum control. Our instructions will give a fit that prioritizes control over comfort. If comfort is a higher priority, or if you have an especially wide or oddly shaped foot, you may do well to choose a slightly larger size. If you are near the boundary between two sizes, you would probably be better off to go with the larger size in case you prefer comfort over control.
 
Notes about Width
In general, the Plastic Boot skates with a built-in liner have a narrower fit through the foot, while the boots with a removable liner and soft boots have a somewhat wider fit. The Carbon is a bit wider through the toe box than the plastic boot skates because the carbon fiber boot has less flex. As a rule of thumb, skates with built-in liners and "regular" liners will have less adjustment room.
 
We gladly will guide you in case you have any further questions. Email us at [email protected]

To help you better, please include all the sizing information off one or two pairs of skates or running shoes that you currently have including EU/US/UK/MP/CM/MM/MONDO, etc...


Powerslide Outback SUV 150mm Frame Set
Powerslide Outback 150 SUV Trinity Off Road Frames Set
CAD$491.97 Add to cart

Powerslide Outback 150 SUV Trinity Off Road Frames Set

CAD$491.97

Powerslide Outback TRINITY 150 frame – made for thrilling action Are you looking for new challenges? Switching to another skate discipline has never been easier. TRINITY isn´t just the best performing mounting system for inline skates, it`s also compatible with ALL models across our range, so with a single Powerslide Trinity mounting boot you can enjoy all segments of skating at any time. Simply change the frames and you´re ready for anything – fitness, speed, urban, off-road, hockey or even ice – TRINITY offers the biggest selection of frames.

The Powerslide Outback 150 is the most powerful SUV frame setup in the collection made for extreme use like downhill slopes or BMX trails. But you don´t have to be an adrenaline junkie to skate the Outback. This frame is also suitable for an exhausting endurance full body workout. TRINITY also offers the well known X-slot mounting system which allows you to customize your boot-frame position by shifting the frame from both sides to side plus forwards and backward. The indestructible Outback frame with its three-point mounting and the large 150mm tires is perfectly suited to SUV skating. Besides enhanced power transfer and reactivity the Outback SUV frame scores with a super low center of gravity which provides perfect balance, stability, and control.

4 in stock

Earn 492 Points (excl. Clearance items)!
Powerslide Inline Skates Logo

Free US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Credit Cards

Size Guide

Perfect for Off-Road

  • Frame: Powerslide SUV ALU 6061 Two-piece axle
  • Frame Size: 328mm/12.9\” ( 3x150mm)
  • Frame Mount: TRINITY-3-point
  • Wheels: V-Mart Air 38x150mm, 7,0 Bar / 100 PSI
  • Wheel Width: 38mm
  • Bearings: Wicked Rustproof
  • Weight: 1395g
  • Designed in Germany, made in China

Additional information

Frame Length (mm)

Wheels Setup

Skating Style

Brand

Frame Mount