Adapt Skates Sizing Chart 2017
Adapt GTO boots
USD$634.97 USD$569.79 Select options
Powerslide Phuzion Argon Black 100 Inline Skates USD$215.50
PlayLife Joker Yellow Glow Junior Skates USD$59.97
Sale!

Adapt GTO boots

USD$569.79

-10%

The Adapt GTO Hyperskate is the brainchild of skate designer Pieter Wijnant. Being obsessed by hand build hypercars for most of his life, Pieter used his passion and knowledge to create the ultimate hyperskate. By using the same technology and mindset the hypercar industry uses, the Adapt GTO is the pinnacle of skate design. Inspired by the prancing horse, the name GTO was given to the ultimate skate. The GTO race series had no limitations and was banned from motorsports for being too dangerous. All GTO cars that were built were left with no other purpose than to raise the bar for every car ever made. The Adapt GTO is a skate with no other purpose than to raise the bar for every skate ever made.

 

The GTO shell is a Hyperskate diolene shell, finished with extra layers of black twill 3k carbon for improved responsiveness and a dark look. Like all Hyperskate models, the GTO features the Quattromount. The Quattromount is the most versatile mount in the industry as it fits both 165mm and 195mm frames as well as the new Symetrics Quattro S frame. The mount also provides an extremely low center of gravity, with the wheels as close to your feet as possible.

 

You can choose between several different setups to create your perfect Hyperskate.
On the one hand we offer the Symetrics Quattro S frame, on the other hand we offer several variants of the Symetrics Hyperframes.
Unlike regular frames, the Quattro S frame is mounted on the outside of the frame, using 4 M6 bolts. This greatly improves power transfer and overall strength of the frame. The Quattro S frame is CNC machined out of a solid block of 7000 aluminum and fits a 2x84mm and 2x90mm setup.
The Symetrics Hyperframe is now available in 4×80, 4×84, 4×90 and 3×110 variants. The Hyperframe is CNC cut out of 7075 billet aluminum and features a perfectly centered mount to create the ultimate feeling of control. The completely intact frame walls and triple bridge make sure that the Hyperframe is the strongest on the market. The Hyperskate GTO is completed with the Symetrics Superfast wheels (available in 80mm, 84mm, 90mm and 110mm) and Symetrics ABEC9 bearings.

Free US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Credit Cards

Questions? Request a Call Back

Perfect for Freeride, Fitness, Urban, and Powerblading.

The 2021 GTO has got several upgrades:

  • The padding in the heel pocket is upgraded for improved fit
  • The nubuck skin is reinforced with ballistic nylon to prevent leather stress around eyelets
  • The internal Quattro mounting plates are now made of aluminum instead of steel. This is not only lighter, it also gives an overall better looking finish.
  • The bottom 3 eyelet sets are now wider apart to allow for more pull on the laces
  • Softfoam added to top of cuff area for improved comfort and fit
  • You can now choose whether you want your GTO skate with Airmesh lining or Onsteam lining.

Airmesh lining provides more comfort and cushioning, while Onsteam lining provides increased responsiveness and a direct feeling.

The GTO is still made with our trusty nubuck 1.3mm leather. In 2020 we switched from 2mm to 1.3mm nubuck. The thinner material means the skin is just a little bit more flexible, which results in a better fit. While the older GTO model needed some break in time, the GTO 2021 forms to your feet straight out of the box. In short, the nubuck v2 leather provides the same strength and durability but with a better fit. The straps are also single layered to increase fit and comfort.

Lining material:

OnSteam lining is a thin but resistant material that was specifically designed to be used in sport-specific shoes. It gives great responsiveness and a direct feeling . This material will take your skate to the next level.
We recommend this material for skaters that are looking for the most responsive option. It is only recommended for advanced skaters and heat molding is advised to ensure a perfect fit.

Check out our Adapt Masterclass episode for more information:

Technical details:

Boat:

  • Dutch Nubuck v2 leather skin
  • Liner: Onsteam
  • High density memory foam
  • Mysole \’Hyperskate\’ insoles
  • Cut-to-size straps, Canadian waxed laces

Shell:

  • Lightweight, impact absorbing diolene shell and extra twill carbon layers with integrated cuff
  • Thermoplastic shell and tongue
  • Quattro mount fits 165,195mm and Symetrics Quattro S frames

Hardware:

  • Symetrics Quattro S frames 84mm / 90mm or:
  • Symetrics 4x80mm / 4x84mm / 4x90mm / 3×110 frames
  • Symetrics Superfast 80mm / 84mm / 90mm / 110mm wheels
  • Symetrics ABEC9 bearings
  • Optional aluminum CNC machined strap / bolt protectors
  • Available in size 36 – 47 EU
  • HandMade in Holand

Additional information

Weight4.5 kg
Size

, , , , , , , , , , ,

Skating Style

,

Brand

Age

,

Wheel Size (mm)

, , ,

Boot Durability

Boots Comfort

Boots Control

Boots Fit

Recommended Skill Level

Boot Ventilation

Liner Type

Adapt Sizing Chart

Adapt skates fit like a tailored shoe. While in most skates people need to take one size bigger than they wear in shoes, in Adapt you will need your actual shoe size. Of course, measuring your feet can be really difficult, so if you really are in doubt, feel free to contact us about this. If you have measured your feet and are unsure of the results you’ve got, please contact us as well. Overall you can take one size smaller in Adapts compared to other skates. If you have already downsized by toe-cutting your skate or using a thinner liner in it, you will not be able to go down one size.

Reviews

There are no reviews yet.

Be the first to review “Adapt GTO boots”
SKU: A-S-GTO-2020-1 Categories: , ,

Related products

Customers also bought