Skate Sizing

Choosing the correct skate size is a very important task and usually even more important than choosing the skates model! All high-quality skates will have a break in period and would adjust over time to the skater’s feet. Some will take longer and some shorter, but while you want to have a comfortable ride you do not want to have the skates too loose… The correct fit will determine much more than just the comfort - it will define how much control, power transfer, and agility you would have while skating, and even would affect the balance.

While various skating styles and skaters themselves have different preferences, below are the general instructions of how to determine the perfect fit for your new skates.


Most of inline and roller skates are manufactured and sold in European sizes (EU), so your US / UK sizing could be a wrong idea to use due to the conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size. In any case, the inline and roller skate size should be either equal to your shoe size or no more than one size up or down from it.
Based on our experience, the best way to determine your skate size is to take a look at your current pair of skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers are indicating the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into brand or model specific sizing chart (usually located in the Sizing tab under the skates photos or as one of the product photos). If cannot be located, please send us an inquiry and we gladly will help you out!
Important: Many shops are recommending measuring your feet to determine your skate size, but we have found that this leads to too many mistakes and do not recommend that. If after following the instructions above you are finding yourself stuck in between two sizes, you could measure your feet according to the directions below. In this case, your shoe size is still the defining factor, so if the measurement is showing more than one size up or down, something is wrong with the measurement! If your foot is wider than average, please go one size up. Usually, Seba, FR, and Adapt skates fit wider than average, Powerslide and K2 average, Flying Eagle and Rollerblade average to narrow...

Still, want to measure your feet? Here is how to do it:

You’ll need paper, pen, a flat wall and, if possible, a buddy to help. It’s best to measure your feet later in the day after you have been on them for a few hours to account for swelling.
Find a hard floor with a flat wall. Tape a piece of paper down so that it touches the wall. Stand on the paper in bare feet, with your heel just touching the wall.
Have your friend take a book and place it so that it just touches the tip of your longest toe. Mark the spot where the book meets your toe. Do this with both feet and use the larger of the two measurements. Measure your foot length in millimeters, if possible. If you measure in inches, be sure to measure in 16ths of an inch.
Choose your size from the manufacturers sizing chart. The “Max Foot Length” is the longest foot measurement that will fit into that size. The US Men’s column lists the sizes found on the box.


Our sizing advice is targeted to a freestyle or dance skater who wants a very snug fit in their skate to enjoy maximum control. Our instructions will give a fit that prioritizes control over comfort. If comfort is a higher priority, or if you have an especially wide or oddly shaped foot, you may do well to choose a slightly larger size. If you are near the boundary between two sizes, you would probably be better off to go with the larger size in case you prefer comfort over control.
Notes about Width
In general, the Plastic Boot skates with a built-in liner have a narrower fit through the foot, while the boots with a removable liner and soft boots have a somewhat wider fit. The Carbon is a bit wider through the toe box than the plastic boot skates because the carbon fiber boot has less flex. As a rule of thumb, skates with built-in liners and "regular" liners will have less adjustment room.
We gladly will guide you in case you have any further questions. Email us at [email protected]

To help you better, please include all the sizing information off one or two pairs of skates or running shoes that you currently have including EU/US/UK/MP/CM/MM/MONDO, etc...

Adapt GTO White 2023 Complete
Adapt GTO White Edition 2023 Complete Skates
USD$869.97 Add to cart

Adapt GTO White Edition 2023 Complete Skates


Symetrics Quattro frames are designed for freeskating and city skating, and can be used only on Adapt Hyperskate boots models of 2017 make and newer. These frames have a hi-lo wheel configuration. This means the two front wheels are smaller than the two back wheels (except for the Quattro R model). The smaller wheels in the front give optimal maneuverability, while the bigger back wheels provide a faster ride. Attention: this is not a rockered frame!

 The Symetrics Quattro frames are mounted using the Quattro Mount, designed and developed by Adapt. Unlike regular frames, the Quattro S frame is mounted on the outside of the frame, using 4 M6 stainless steel bolts, which are – like the frame – designed and manufactured in-house. This way of mounting greatly improves power transfer and the overall strength of the frame. The frame does not flex under the boot as frames mounted with 2 or 3 bolts do. The Quattro frames are CNC machined out of a solid block of 7000 aluminum and have intact sidewalls and internal bridges for maximum strength. Compared to the 2021 and earlier Quattro frames, Adapt has slimmed down the design a bit to decrease the weight.

Fully made in the Netherlands and designed by Pieter Wijnant, this frame is the next level when it comes to skating. Every frame is CNC machined to perfection and anodized for a perfect finish. The graphics are laser burned into the frame. Symetrics frames are made in-house and are a product of The Netherlands.


Adapt GTO 2023 Boots* Required

Clear selection

Hyper Frames /Setup* Optional

Must be selected unless a Quattro Frame will be selected in the next Step!

Clear selection

Quattro Frames /Setup* Optional

Must be selected unless a Hyper Frame was selected in the previous Step!

Clear selection
Product Base Price:
Add-Ons Option Total:
Component Options Total:
Order Total:

The add to cart button is disabled because the following component is not selected:

Earn 870 Points (excl. Clearance items)!

Free contiguous US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Credit Cards

Size Guide

Backorder Sizes: Adapt skates are made to order. This means that after you placed your order, your pair of skates will be made especially for you. During high season (April-September) production time is about 6-8 weeks, all other months production time is about 4-6 weeks. 

The GTO shell is a Hyperskate diolene shell, finished with extra layers of black twill 3k carbon for improved responsiveness and a dark look. Like all Hyperskate models, the GTO features the Quattromount. The Quattromount is the most versatile mount in the industry as it fits both 165mm and 195mm frames as well as the Symetrics Quattro frames. The mount also provides an extremely low center of gravity, with the wheels as close to your feet as possible.

This set will include:

  • Boots: Dutch Nubuck v2 leather skin with Replaceable liner piece and High-density memory foam
  • Frames:
    • Symetrics Hyper 4×80 / 4×84 / 4×90 / 3×110 / 4×100 / 4×110
    • Symetrics Quattro S 80/84 / 84/90 / 90×100,  Symetrics Quattro R 100/110
  • Wheels: Symetrics Superfast Black 90A (80mm / 84mm / 90mm /100mm / 110mm)
  • Bearings: Symetrics 7-ball ABEC9
  • Laces: Canadian waxed laces
  • Optional cut-to-size 45 degrees powerstrap

Additional information

Weight5 kg
Boot Durability

Boots Comfort

Boots Control

Boots Fit

Recommended Skill Level

Boot Ventilation

Skating Style


Designed for



, , ,

Wheel Size (mm)

, , , ,

Adapt Sizing Chart

Adapt skates fit like a tailored shoe. While in most skates people need to take one size bigger than they wear in shoes, in Adapt you will need your actual shoe size. Of course, measuring your feet can be really difficult, so if you really are in doubt, feel free to contact us about this. If you have measured your feet and are unsure of the results you’ve got, please contact us as well. Overall you can take one size smaller in Adapts compared to other skates. If you have already downsized by toe-cutting your skate or using a thinner liner in it, you will not be able to go down one size.

Adapt 2023 Sizing Chart


There are no reviews yet.

Be the first to review “Adapt GTO White Edition 2023 Complete Skates”