Skate Sizing


Choosing the correct skate size is a very important task and usually even more important than choosing the skate model! All high-quality skates will have a break-in period and will adjust over time to the skater’s feet. Some will take longer and some shorter, but while you want to have a comfortable ride you do not want to have the skates too loose… The correct fit will determine much more than just the comfort - it will define how much control, power transfer, and agility you would have while skating, and even would affect the balance.

Please remember that the skates will feel the worst when you try them for the first time and from there the fit will only improve!!!

While various skating styles and skaters themselves have different preferences, below are the general instructions on how to determine the perfect fit for your new skates.

WHAT SIZE SHOULD I CHOOSE?

Most inline and roller skates are manufactured and sold in European sizes (EU), so your US / UK sizing could be a wrong idea to use due to conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size. In any case, the inline and roller skate size should be either equal to your shoe size or no more than one size up or down from it.

Based on our experience, the best way to determine your skate size is to take a look at your current pair of skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers are indicating the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into the brand or model-specific sizing chart (usually located in the Sizing tab under the skates photos or as one of the product photos). If cannot be located, please send us an inquiry and we gladly will help you out!

Important: Many shops are recommending measuring your feet to determine your skate size, but we have found that this leads to too many mistakes and do not recommend that. If after following the instructions above you are finding yourself stuck in between two sizes, you could measure your feet according to the directions below. In this case, your shoe size is still the defining factor, so if the measurement is showing more than one size up or down, something is wrong with the measurement! If your foot is wider than average, please go one size up. Usually, Seba, FR, and Adapt skates fit wider than average, Powerslide and K2 average, Flying Eagle and Rollerblade average to narrow...

Still, want to measure your feet? Here is how to do it:

You’ll need paper, a pen, a flat wall, and, if possible, a buddy to help. It’s best to measure your feet later in the day after you have been on them for a few hours to account for swelling.
Find a hard floor with a flat wall. Tape a piece of paper down so that it touches the wall. Stand on the paper in bare feet, with your heel just touching the wall.
Have your friend take a book and place it so that it just touches the tip of your longest toe. Mark the spot where the book meets your toe. Do this with both feet and use the larger of the two measurements. Measure your foot length in millimeters, if possible. If you measure in inches, be sure to measure in 16ths of an inch.
Choose your size from the manufacturer's sizing chart. The “Max Foot Length” is the longest foot measurement that will fit into that size. The US Men’s column lists the sizes found on the box.

Here is a great sizing video courtesy of Powerslide:

https://youtu.be/G6X4X5K93XU?si=TCY2d6KWGuz0o6HH

 

SIZING FOR CONTROL OVER COMFORT

Our sizing advice is targeted at freestyle or dance skater who wants a very snug fit in their skate to enjoy maximum control. Our instructions will give a fit that prioritizes control over comfort. If comfort is a higher priority, or if you have an especially wide or oddly shaped foot, you may do well to choose a slightly larger size. If you are near the boundary between two sizes, you would probably be better off going with the larger size in case you prefer comfort over control.

Notes about Width
In general, the Plastic Boot skates with a built-in liner have a narrower fit through the foot, while the boots with a removable liner and soft boots have a somewhat wider fit. The Carbon is a bit wider through the toe box than the plastic boot skates because the carbon fiber boot has less flex. As a rule of thumb, skates with built-in liners and "regular" liners will have less adjustment room.

We gladly will guide you in case you have any further questions. Email us at [email protected]

To help you better, please include all the sizing information off one or two pairs of skates or running shoes that you currently have including EU/US/UK/MP/CM/MM/MONDO, etc...


↓ 50%

USD Aeon 60 Basic XXI Aggressive Inline Skates

Original price was: US$290.00.Current price is: US$144.79.

-50%
USD Aeon Sizing Chart

USD Aeon Inline Skates Sizing Chart

According to Powerslide, Aeon boot runs smaller compared to other brands. It is recommended to add at least half a centimeter to the foot length. Moreover, boots tend to run narrow in width.

These skates are manufactured in European sizes (EU), so your US / UK sizing could be misleading due to conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size.

Based on our experience, the best way to determine your skate size is to take a look at your current pair of inline/roller skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers indicate the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into the sizing chart below.

Important: measuring your feet to determine your skate size would be a good point of reference, but at the same time it leads to too many mistakes. If after following the instructions above you are finding yourself stuck between two sizes, you could measure your feet according to the directions posted in our Sizing Instructions. Also, we encourage visiting Powerslide’s Skate Guide.


US MEuroUKInchesMONDO (MM)US W
5 - 636 - 384 - 59.01-9.53229 - 2426 - 7
7 - 7.539 - 406 - 6.59.76-10.04248 - 2558 - 8.5
8 - 941 - 427 - 810.27-10.55261 - 2689 - 10
10 - 10.543 - 449 - 9.510.83-11.1275 - 282N/A
11 - 1245 - 4610 - 1111.38-11.65289 - 296N/A

Note: Your athletic shoe size is the defining factor! Rarely, the size of the inline skates will be smaller than your shoe size (unlike ice skates) unless you require maximum control and do not care much about comfort. If your foot is wider than average, please go one size up than your shoe size. 

Unparalleled Performance and Design

USD Aeon 60 Basic XXI Aggressive Inline Skates are meticulously designed to elevate your aggressive skating experience. They are the epitome of perfection, combining enhanced features and state-of-the-art technology to provide skaters with unmatched comfort, support, and durability. The skates are equipped with a thicker shock absorber and a new higher, height-adjustable cuff, offering more support and comfort right out of the box.

Innovative Features for Pro Skaters

USD Aeon 60 Basic XXI Aggressive Inline Skates have integrated innovative features such as a unibody shell with lightweight one-piece glass-fiber reinforced plastic (GFRP) – GFK, top lock strap and laces closures, and a new design plastic full lock cuff. The removable, basic dual fit liner is heat-moldable, ensuring a customized fit, optimal comfort, and high performance.

Precision and Control

The new 61mm wheels of USD Aeon 60 Basic XXI Aggressive Inline Skates come with an improved core and round profile, making the wheels fast and grippy. The skates are designed to provide the most direct grinding experience supported by a simple yet effective basic liner that offers all you need in fit, comfort, and performance.

Explore More with USD Skates

Discover a range of Inline Skates and accessories at ProSkaters Place. Whether you are into Off Road / SUV or RollerSki / Nordic, we have something for every skating enthusiast. USD Skates, specifically the Aeon 60 Basic XXI, are a testament to quality and innovation in aggressive inline skating. They offer a blend of comfort, support, and high performance, making them a preferred choice for pro skaters. Explore the world of aggressive inline skating with USD Skates at ProSkaters Place and experience the difference.

This Product is on Clearance and will not quality for Refunds! Only Exchanges or Returns for store credit will be applicable!
Universal Skate Design Logo

Free contiguous US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Credit Cards

Size Guide
USD Aeon 60 Basic XXI Aggressive Inline Skates
USD Aeon 60 Basic XXI Aggressive Inline Skates
US$290.00 Original price was: US$290.00.US$144.79Current price is: US$144.79.

    USD Aeon 60 Basic XXI Aggressive Inline Skates

    Welcome to ProSkaters Place, your go-to destination for all skating needs, presenting the USD Aeon 60 Basic XXI Aggressive Inline Skates, a symbol of innovation and quality in the world of aggressive inline skating. USD Skates has been a beacon of reliability and performance, and the Aeon 60 Basic XXI is no exception.


    USD Aeon 60 Basic XXI Aggressive Inline Skates are Perfect for Aggressive and Freeride.

    The size 37/38EU is actually size 36/37/38EU!

    • Shell: Unibody with lightweight one-piece glass-fibre reinforced plastic (GFRP) – GFK
    • Closures: Top Lock Strap and Laces
    • Cuff: New design. Plastic Full Lock
    • Liners: Removable, USD Basic dual fit liner, Heat-Moldable
    • Heel Shock Absorber and Removable Abrasive Pad Slider
    • Frame: Not Removable with Soulplate
    • Frame Wheel Base: 36/37/38 – 9,7\” (246mm),  39-42 – 10,1\” (256mm),  43-46 – 10,6\” (269mm)
    • Wheels: USD Team Basic 61mm SHR 90A
    • Bearings: Wicked ABEC7
    • Innersole: MYFIT EVA skatesole, Aeon 20mm Shock Absorber
    • Shell Sizes: EU 36/37/38, 39/40, 41/42, 43/44, 45/46
    • Brake: No
    • Skate Height: 27,5cm (size 41/42)
    • Skate Weight: 1540g (size 41/42)
    USD Aeon 60 Basic aggressive skate - Rolling Review

     

    Additional information

    Weight 4.5 kg
    Size

    , , , , , , , , , , , , , , , , , , , ,

    Skating Style

    Brand

    Gender

    Boot Durability

    Boots Comfort

    Boots Control

    Boots Fit

    Setup Speed

    Recommended Skill Level

    Boot Ventilation

    Setup

    Wheel Size (mm)

    USD Aeon Sizing

    USD Aeon boot runs smaller compared to other brands. It is recommended to add at least half a centimeter to the foot length. Moreover, USD boots tend to run narrow in width.

    Please note: your shoe size is the defining factor! Almost never, the size of the inline skates will be smaller than your shoe size. If your foot is wider than average, please go one size up than your shoe size.

    USD Aeon Sizing

    If you want to use the foot length information to narrow the sizing down, the best way is to get that information from your running/sports shoes sizing label. Almost always they will have one of the following: MP/MONDO/CM – length in centimeters or MM – length in millimeters.

    • The US shoe sizes mentioned in the sizing table are US men.

    Reviews

    There are no reviews yet.

    Be the first to review “USD Aeon 60 Basic XXI Aggressive Inline Skates”