Skate Sizing


Choosing the correct skate size is a very important task and usually even more important than choosing the skates model! All high-quality skates will have a break in period and would adjust over time to the skater’s feet. Some will take longer and some shorter, but while you want to have a comfortable ride you do not want to have the skates too loose… The correct fit will determine much more than just the comfort - it will define how much control, power transfer, and agility you would have while skating, and even would affect the balance.

While various skating styles and skaters themselves have different preferences, below are the general instructions of how to determine the perfect fit for your new skates.
 

WHAT SIZE SHOULD I CHOOSE?

Most of inline and roller skates are manufactured and sold in European sizes (EU), so your US / UK sizing could be a wrong idea to use due to the conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size. In any case, the inline and roller skate size should be either equal to your shoe size or no more than one size up or down from it.
 
Based on our experience, the best way to determine your skate size is to take a look at your current pair of skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers are indicating the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into brand or model specific sizing chart (usually located in the Sizing tab under the skates photos or as one of the product photos). If cannot be located, please send us an inquiry and we gladly will help you out!
 
Important: Many shops are recommending measuring your feet to determine your skate size, but we have found that this leads to too many mistakes and do not recommend that. If after following the instructions above you are finding yourself stuck in between two sizes, you could measure your feet according to the directions below. In this case, your shoe size is still the defining factor, so if the measurement is showing more than one size up or down, something is wrong with the measurement! If your foot is wider than average, please go one size up. Usually, Seba, FR, and Adapt skates fit wider than average, Powerslide and K2 average, Flying Eagle and Rollerblade average to narrow...
 

Still, want to measure your feet? Here is how to do it:

You’ll need paper, pen, a flat wall and, if possible, a buddy to help. It’s best to measure your feet later in the day after you have been on them for a few hours to account for swelling.
Find a hard floor with a flat wall. Tape a piece of paper down so that it touches the wall. Stand on the paper in bare feet, with your heel just touching the wall.
Have your friend take a book and place it so that it just touches the tip of your longest toe. Mark the spot where the book meets your toe. Do this with both feet and use the larger of the two measurements. Measure your foot length in millimeters, if possible. If you measure in inches, be sure to measure in 16ths of an inch.
Choose your size from the manufacturers sizing chart. The “Max Foot Length” is the longest foot measurement that will fit into that size. The US Men’s column lists the sizes found on the box.
 

SIZING FOR CONTROL OVER COMFORT

Our sizing advice is targeted to a freestyle or dance skater who wants a very snug fit in their skate to enjoy maximum control. Our instructions will give a fit that prioritizes control over comfort. If comfort is a higher priority, or if you have an especially wide or oddly shaped foot, you may do well to choose a slightly larger size. If you are near the boundary between two sizes, you would probably be better off to go with the larger size in case you prefer comfort over control.
 
Notes about Width
In general, the Plastic Boot skates with a built-in liner have a narrower fit through the foot, while the boots with a removable liner and soft boots have a somewhat wider fit. The Carbon is a bit wider through the toe box than the plastic boot skates because the carbon fiber boot has less flex. As a rule of thumb, skates with built-in liners and "regular" liners will have less adjustment room.
 
We gladly will guide you in case you have any further questions. Email us at [email protected]

To help you better, please include all the sizing information off one or two pairs of skates or running shoes that you currently have including EU/US/UK/MP/CM/MM/MONDO, etc...


Powerslide Junior Skater Protective Shorts
44.97 Add to cart

Powerslide Junior Skater Protective Shorts

44.97

The Powerslide Junior protective short is made for active kids who like the adrenaline rush, but still want to be well protected. High-density EVA foams protect your body with the lowest possible profile.

The breathable and light protective shorts can be used for all kinds of action sports like inline skating, skateboarding, snowboarding, or BMX riding.

4 in stock

Earn 45 Points (excl. Clearance items)!
Powerslide Inline Skates Logo

Free US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Credit Cards

Size Guide

Features:

  • Material: elasthane, aero mesh
  • Padding: dual-density EVA
  • Standard: EN 1621-1:2012
  • Good for all kinds of action sports including inline and roller skating, skateboarding, scooters, snowboarding, and ice skating.

Available in size XS.

Additional information

Weight1 kg
Sizes

Brand

Skating Style

, ,

1 review for Powerslide Junior Skater Protective Shorts

  1. Arina (verified owner)

    No RIght Sizes for Small Children!

    I bought the XS size for my 6 year old daughter. She will turn 7 this spring. She is a thin and very agile girl. The shorts are designed to be worn under the jeans, they are thin and not too bulky and, as other users stated, they protect well on impact, but unfortunately XS size turned to be so big that I can literary put them on my own (far from being petite) adult butt. I might have kept them for myself, but the problem is that protection pads when I put the shorts on myself are not exactly on the anatomical locations of the bony prominences because my butt does overstretch the fabric. I wear size 4 and I might eventually lose a few pounds to wear them comfortably or wait another 7 years in hope she won’t quit skating by that time and will be wearing them when she grows up to their size. There is no way she can wear them under her clothes now or in the next 2-3 years. On a six year old child they look like a parachute even if you put them on top of super bulky winter stuffed pants. They might fit her well when she turns 12 or 14 or let’s say becomes morbidly obese before she hits her puberty.
    Long story short: I believe XS size shots are big enough to fit an adult who wears sizes 0-2. I talked to Pavel and I was told that unfortunately no other brand makes any smaller versions of crush pants for kids. This is really a pity because most kids start rollerblading and skating much earlier in their lives and they do need to be protected from trauma now.

Add a review