Skate Sizing

Choosing the correct skate size is a very important task and usually even more important than choosing the skate model! All high-quality skates will have a break-in period and will adjust over time to the skater’s feet. Some will take longer and some shorter, but while you want to have a comfortable ride you do not want to have the skates too loose… The correct fit will determine much more than just the comfort - it will define how much control, power transfer, and agility you would have while skating, and even would affect the balance.

Please remember that the skates will feel the worst when you try them for the first time and from there the fit will only improve!!!

While various skating styles and skaters themselves have different preferences, below are the general instructions on how to determine the perfect fit for your new skates.


Most inline and roller skates are manufactured and sold in European sizes (EU), so your US / UK sizing could be a wrong idea to use due to conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size. In any case, the inline and roller skate size should be either equal to your shoe size or no more than one size up or down from it.

Based on our experience, the best way to determine your skate size is to take a look at your current pair of skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers are indicating the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into the brand or model-specific sizing chart (usually located in the Sizing tab under the skates photos or as one of the product photos). If cannot be located, please send us an inquiry and we gladly will help you out!

Important: Many shops are recommending measuring your feet to determine your skate size, but we have found that this leads to too many mistakes and do not recommend that. If after following the instructions above you are finding yourself stuck in between two sizes, you could measure your feet according to the directions below. In this case, your shoe size is still the defining factor, so if the measurement is showing more than one size up or down, something is wrong with the measurement! If your foot is wider than average, please go one size up. Usually, Seba, FR, and Adapt skates fit wider than average, Powerslide and K2 average, Flying Eagle and Rollerblade average to narrow...

Still, want to measure your feet? Here is how to do it:

You’ll need paper, a pen, a flat wall, and, if possible, a buddy to help. It’s best to measure your feet later in the day after you have been on them for a few hours to account for swelling.
Find a hard floor with a flat wall. Tape a piece of paper down so that it touches the wall. Stand on the paper in bare feet, with your heel just touching the wall.
Have your friend take a book and place it so that it just touches the tip of your longest toe. Mark the spot where the book meets your toe. Do this with both feet and use the larger of the two measurements. Measure your foot length in millimeters, if possible. If you measure in inches, be sure to measure in 16ths of an inch.
Choose your size from the manufacturer's sizing chart. The “Max Foot Length” is the longest foot measurement that will fit into that size. The US Men’s column lists the sizes found on the box.

Here is a great sizing video courtesy of Powerslide:



Our sizing advice is targeted at freestyle or dance skater who wants a very snug fit in their skate to enjoy maximum control. Our instructions will give a fit that prioritizes control over comfort. If comfort is a higher priority, or if you have an especially wide or oddly shaped foot, you may do well to choose a slightly larger size. If you are near the boundary between two sizes, you would probably be better off going with the larger size in case you prefer comfort over control.

Notes about Width
In general, the Plastic Boot skates with a built-in liner have a narrower fit through the foot, while the boots with a removable liner and soft boots have a somewhat wider fit. The Carbon is a bit wider through the toe box than the plastic boot skates because the carbon fiber boot has less flex. As a rule of thumb, skates with built-in liners and "regular" liners will have less adjustment room.

We gladly will guide you in case you have any further questions. Email us at [email protected]

To help you better, please include all the sizing information off one or two pairs of skates or running shoes that you currently have including EU/US/UK/MP/CM/MM/MONDO, etc...

Powerslide XC Skeleton 150 Off-Road Rollerski Skates
Powerslide XC Skeleton 150 Off-Road Rollerski Skates
USD$550.00 USD$459.79 Select options

Powerslide XC Skeleton 150 Off-Road Rollerski Skates



Powerslide XC Skeleton 150 Off-Road Rollerski Skates are the perfect all-season training device. At first glance, the Powerslide XC Skeleton did not change, but if you take a closer look you will see that the skate now features the patented TRINITY 3-point mounting system. The skate is easier to handle because TRINITY offers more control, more balance, and better power transfer.

The base of the Powerslide XC Skeleton 150 Off-Road Rollerski Skates can be adjusted to fit your own foot size, which guarantees the best comfort for your off-road skating tours. The sophisticated closing system is based on a large flap including ratchet buckles on top and at a 45-degree position as well as a ratchet buckle in the toe area to lock the foot in perfectly and provide great support. Safety is guaranteed with the cuff brake including an aluminum stamp. The new Trinity frame has a long wheelbase which ensures smooth running performance. The 150mm air tires and Wicked rustproof bearings complete this great off-road skate package.

The XC Skeleton is the perfect skate to explore new limits and enjoy nature at any time of the year. All-season, all-terrain, all-weather. Please note: These skates will be very sluggish on solid pavement such as asphalt and concrete unless used with the Powerslide Roadrunner 150mm polyurethane wheels.

Powerslide Inline Skates Logo

Free contiguous US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Credit Cards

Size Guide

Powerslide XC Skeleton 150 Off-Road Rollerski Skates are perfect for Cross-Over skating, Kiting, Off-Road, and Nordic Ski.

Technical details :

  • Boots: Glass-fiber reinforced plastic (GFRP) – GFK High Cut
  • Closure: Micro adjustable ratchet straps
  • Frame: 20.2″ (51.3 cm) AL with Trinity Mount
  • Wheels: 150mm (7,0 Bar / 100 PSI)
  • Bearings: Wicked Twincam Rustproof
  • Cuff Brake
  • Weight: 2390g (left/size 41)
  • Sizes: 37 – 49EU Size Adjustable
  • Designed in Germany, made in China


Additional information

Weight7 kg

, , , , , , , , , , , , , , , , , , , , ,

Skating Style


Designed for

Wheel Size (mm)

Boot Durability

Boots Comfort

Boots Control

Boots Fit

Setup Speed

Recommended Skill Level

Boot Ventilation


PS Skeleton Sizing Chart

The XC Skeleton skates are using the Doop / Xsjado style boots and allow you to use your running shoes or sneakers for skating. If your shoe size is borderline between the two sizes, we recommend going with the smaller one as it will prove to be less bulky and will provide better control.

Please note: the shoes need to be with a flat or almost flat sole and regular (not oversized) heel to fit perfectly into these skates.


There are no reviews yet.

Be the first to review “Powerslide XC Skeleton 150 Off-Road Rollerski Skates”